Indoor pneumatic elevator_Profession Motor Manufacturer for BG Motor_DC Motor_AC Universal Motor_DC Brushless Motor

HOME > SOLUTION> Indoor pneumatic elevator

Indoor pneumatic elevator

Customer name: Arduino

Country: Argentina

Industry: Construction industry

Basic information of the customer:

This customer is a company specializing in indoor pneumatic elevators in Argentina.

The customer's pneumatic elevator works under the principle of pneumatic and vacuum. These two principles are different and related to each other, which together gave birth to the technology of pneumatic elevator. Pneumatics is a technology that uses air as the energy transfer mode required to move and operate the mechanism, in our case it is a pneumatic elevator car. On the other hand, vacuum is a condition for sealing a cavity, where the pressure of air or other gas is less than atmospheric pressure.

What they need：Brushless fan motor with high power, large flow and large suction

DIFFICULTY

1. Because the motor needs to run for a long time, a high-quality motor is required.

2. The customer needs a large flow and suction power, and the power needs to reach 1000W.

3.The use environment is indoors, and the noise needs to be as low as possible.

SOLUTION

1. We select all the magnetic materials of the highest grade to increase the life of the motor and at the same time improve the efficiency of the motor, which solves the problems of life and quality.

2. The motor we recommend to customers uses high-quality copper wires and the best magnetic materials, which can meet customer requirements.

3. When we make the motor, we have strict requirements on the tolerance size range, and we have done a lot of comparison samples to ensure that the motor can not only meet the torque and long life, but also solve the noise of the motor gearbox. , To ensure the low noise operation of the motor.

FOLLOW-UP

When the customer received our samples and tested them for several months, the performance, speed, torque, stability, and noise of the motor were all subjected to harsh load tests. The customer reported that the performance of the motor and all other data were all satisfied. His request, because more product stability tests need to be done before sales, so it will take time, and follow-up orders will definitely contact us.

Feedback:

We originally felt that we could not find a suitable motor in China, until I met Bob, who carefully recommended a lot of motors for me, and finally I found one that met all the requirements, and now our test results are good. I really appreciate his help.

BACK