With the increasing attention to green energy saving, the home industry manufacturing industry is more and more stringent on the original production.
Fan technology is changing like never before.A brushless motor fan is a fan that uses brushless DC technology as a driving device, which is characterized by energy saving, low noise, good remote control performance, and longer life.
This article will give you a detailed introduction to the comparison between brushless DC fans and traditional fans, as well as the advantages and disadvantages
1. Better energy saving and environmental protection effect: According to measurable effective data, brushless motor fans generally reduce the power consumption of fans by 60%-80% compared with other motor types.
2. Long service life: Brushless DC motor, as the name suggests, is a DC motor without carbon brushes. The fan that uses the brushless motor as the driving device naturally does not have carbon brushes, so in the subsequent fan maintenance, the cost factor such as cleaning, updating and damage of carbon brushes can be reduced. In addition, it has thicker cable windings so that the fan does not overheat.
3. Lower noise: Due to the absence of carbon brushes, the wear is very small, and the life span can reach tens of thousands of hours, far exceeding the life of the brush motor.
4. Better control performance: In general, brushless motor fans will be equipped with a remote control system to improve user comfort and convenience.
5. Diversified applications: Brushless motor fans are used in a variety of occasions, such as home fans, high-end home appliances, intelligent medical equipment, etc.
1. Higher cost: The performance of brushless motor is better than that of brushed motor in many aspects, and the use of electronic controller, so the production cost is higher, so the upfront investment will be slightly higher.
2. High installation technical requirements: due to the reform of the fan drive system, it is necessary to find professional and technical personnel to install and deploy.
3. Fault diagnosis: The failure of the electronic control system may lead to the overall operation problem, and the repair is relatively complicated.
Brushless motor fan: Rotates the magnetic field through the electronic control system, which is driven by a permanent magnet rotor and has no frictional loss.
Traditional fan: using a brushed motor, relying on the brush and commutator to achieve current switching, there is friction loss.
Brushless motor fan: high energy conversion efficiency, usually more than 80%, and the energy saving effect is remarkable.
Traditional fans: low efficiency, usually between 60%-75%, relatively high energy consumption.
Brushless motor fan: long life, usually up to tens of thousands of hours, low maintenance requirements.
Traditional fans: short life, due to brush wear, need to be replaced regularly, high maintenance costs.
Brushless motor fan: low noise during operation, suitable for home and office environments.
Traditional fans: noisy, especially at high speeds, may affect the user experience.
Brushless motor fan: the initial investment is higher, and the manufacturing cost is higher than that of traditional motors.
Traditional fans: The initial cost is lower, but the long-term maintenance cost may increase.
Brushless motor fan: Able to precisely adjust speed and torque, support intelligent control and remote adjustment.
Traditional fans: Relatively simple speed regulation, low flexibility, lack of intelligent control options.
Brushless motor fans: widely used in high-end home appliances, smart devices, medical equipment and other places that require high performance and low noise.
Traditional fans: mainly used in general home and office environments, cost-sensitive occasions.
BLDC motor fan:BG motor is a motor company focusing on high precision, customization, long life, the brushless motor provided can be selected, if you have special scene customization needs, as long as you provide data and related details, we can provide technical personnel to communicate with you one-on-one, solve problems, customize products, and provide confidential services for your data.
Usage scenario: The brushless motor fans produced byBG Motor are mainly used in car air conditioners, shopping mall refrigeration, household equipment, medical coolers and other occasions, so if you have the need for refrigeration or use of fans, you can contact our technical engineers for detailed communication.
We will customize the design of the motor style to be more energy-efficient, lightweight, cost-compliant, and even special in shape according to your application scenario.
1.Customized solution to problems, including voltage, torque, power, size, etc.
2. Provide data confidentiality services.
3. Arrange one-to-one communication with professional and technical personnel from beginning to end.
4. Provide after-sales installation, maintenance and other services.
5.For the shortcomings pointed out above, we will also send special technical personnel to communicate with you to solve, first of all, for price-sensitive customers, we will provide you with the most optimized and cost-effective professional solutions.
6.Secondly, we will arrange professional guidance and assistance in installation, if the distance is far, online video teaching.
7.Finally, we will provide you with a description of the motor failure and a specific solution to minimize the probability of motor failure.
If you have any needs, please contact us in time.
BACK
Torque in a motor refers to the rotational force generated to perform work. It’s…
Thanksgiving in the United States is a major holiday, celebrated on the fourth T…
Alternating current (AC) powers nearly every modern device. However, many people…
Geared motors combine electric motors with gear systems to reduce speed and incr…
In today's rapidly evolving industries, standard motors often fail to meet t…
On October 19, 2024, the first offline exhibition of the 136th Canton Fair came …
Automation has revolutionized industries, bringing efficiency, consistency, and …
Robot technology is rapidly changing the modern industry, stable and reliable, e…
